Product Description
16148738
Type: Gear Flex Coupling
Applied: Atlas Copco
Certificate: iso 9 replace by Coupling Element 16148738 applies to the screw air compressor GA 90-160,807,1410 New.
| Coupling | Coupling |
| 1613949900 | 1613982300 |
| 1614873800 | 1613958500 |
| 165710800 | 165710800 |
| 162357100 | 1619646700 |
| 1615678500 | 165714700 |
| 1615682500 | 1604076100 |
| 1613982300 | 1626510900 |
Coupling Features
- Good starting performance can change the load starting of the motor to no-load starting, so as to realize the soft starting of the working machine, reduce the current during starting and reduce the starting energy consumption.
- Save electric energy and equipment cost, which can solve the unreasonable situation of the big horse-drawn trolley with load starting machine, save the motor capacity, improve the power factor and motor efficiency of the grid, reduce reactive power loss, save electric energy, and simplify the motor starting equipment and reduce equipment cost.
- The transferred torque can be adjusted, easy to achieve overload protection.When the working machine is overloaded or jammed, the steel ball type safety coupling will slip automatically, which can prevent the motor from burning out and other parts damage.
- Except for the starting and braking stages, the main and driven parts of the steel ball safety coupling have no speed difference, no friction loss and high transmission efficiency.
- Nonmetallic elastic elements are adopted in the steel ball type safety coupling, which can compensate the offset of the linked 2 axes within a certain range, with a small amount of buffering and damping.
- Reliable operation, stable performance, convenient installation, disassembly and maintenance.
Determining the right type of flexible coupling starts with the following analysis of the application:
- Prime mover type (motor, diesel engine, etc.) of the drive side of the system
- Actual horsepower and/or torque requirements, not prime motor-rated horsepower (note the range of variable torque caused by periodic or unstable loads, worst-case starting loads,
- Drive system inertia related to prime mover inertia (data available from equipment supplier)
- vibration, linear and torsional vibration (experienced supplier or consultant can help you evaluate vibration) shaft-to-shaft deviation;
- Note the degree of Angle offset (axis is not parallel) and parallel offset (distance between axis centers when axes are parallel but not aligned);
- Also note whether the drive/driven units share the same floor axial (inside/outside) axial motion,
- whether they share distance (the distance between the drive end and the driven axis), and any other space-related restrictions.
| Other Couplings: |
We are able to offer a wide range of special couplings, which are based on your samples or drawings.
Due to the refinement of production operations and the high-end technology, we have been able to produce high-quality Rubber Coupling, Trolley Wheel, Flexible Coupling, Flexible Rubber Coupling, Industrial Rubber Coupling, Star Coupling, CZPT type Coupling Spare and other products, widely used in industrial applications.
All these products are tested and checked against the set quality parameters before being sent to the customer. This shows that we are willing to provide our customers with updated and perfect product lines to meet their different needs. In addition, we also provide customized solutions to provide customers with a wide range of space, so that they can choose their favorite products according to their needs and requirements.
| Company Profile&Certifications: |
Now over 100,000 quality filters including compressed air filters, Hydraulic Filters and complete filter housing assemblies at wholesale discounts. We offer OEM products as well as high quality replacements, engineered to precise OEM specifications and guaranteed to match the exact form, fit and function as the original equipment. Our company is committed to continuous innovation and further improvement to create, improve the efficiency and productivity of excellence, to achieve the highest level of reliability and performance.
| FAQ: |
Q1. What is your product range?
A: Our products cover replacement hydraulic filter, Air compressor filters, Compressed air filter element, Heavy truck insert filters, Vacuum pump filters, and Some spare parts for compressors.
Q2. Is customized filter or OEM available?
A: Yes, just offer your required specifications and drawings.
Q3. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build new molds, but open new mold fee charged, when you place bulk order, the mold fee can return back.
Q4. What’s your terms of packing?
A: Generally, we pack our goods in neutral boxes,outside brown carton cases. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. What’s the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balancing.
Q6. What’s your terms of delivery?
A: (1)FOB (2)CFR (3)CIF.
Q7. How about your delivery time?
A: Generally, under MOQ quantity take 5-7 working days after receiving your advance payment. The specific delivery time depends on models and the quantity of your order.
Q8. What’s your sample policy?
A: ,,,.
| Customized: | Non-Customized |
|---|---|
| Standard Component: | Standard Component |
| Type: | Gear Flex Coupling |
| MOQ: | 1unit |
| Lead Time: | Aroud 3-5 Working Days After Order Confirmed |
| Package: | PP Bag Inside, Inner Carton, Export Carton Outside |
| Customization: |
Available
| Customized Request |
|---|
What Is a Coupling?
A coupling is a device used to connect two shafts. It transmits power between them and allows for some misalignment or end movement. There are several types of couplings. The most common ones are gear couplings and planetary couplings. However, there are many others as well.
Transfer of energy
Energy coupling is a process by which two biological reactions are linked by sharing energy. The energy released during one reaction can be used to drive the second. It is a very useful mechanism that synchronizes two biological systems. All cells have two types of reactions, exergonic and endergonic, and they are connected through energy coupling.
This process is important for a number of reasons. The first is that it allows the exchange of electrons and their energy. In a single molecule, this energy transfer involves the exchange of two electrons of different energy and spin. This exchange occurs because of the overlap interaction of two MOs.
Secondly, it is possible to achieve quadratic coupling. This is a phenomenon that occurs in circular membrane resonators when the system is statically deflected. This phenomenon has been gaining a great deal of interest as a mechanism for stronger coupling. If this mechanism is employed in a physical system, energy can be transferred on a nanometer scale.
The magnetic field is another important factor that affects the exchange of energy between semiconductor QWs. A strong magnetic field controls the strength of the coupling and the energy order of the exciton. The magnetic field can also influence the direction of polariton-mediated energy transfer. This mechanism is very promising for controlling the routing of excitation in a semiconductor.
Functions
Couplings play a variety of functions, including transferring power, compensating for misalignment, and absorbing shock. These functions depend on the type of shaft being coupled. There are four basic types: angular, parallel, and symmetrical. In many cases, coupling is necessary to accommodate misalignment.
Couplings are mechanical devices that join two rotating pieces of equipment. They are used to transfer power and allow for a small degree of end-to-end misalignment. This allows them to be used in many different applications, such as the transmission from the gearbox to the differential in an automobile. In addition, couplings can be used to transfer power to spindles.
Types
There are two main types of couplings: rigid and flexible. Rigid couplings are designed to prevent relative motion between the two shafts and are suitable for applications where precise alignment is required. However, high stresses in the case of significant misalignment can cause early failure of the coupling. Flexible couplings, on the other hand, allow for misalignment and allow for torque transmission.
A software application may exhibit different types of coupling. The first type involves the use of data. This means that one module may use data from another module for its operation. A good example of data coupling is the inheritance of an object. In a software application, one module can use another module’s data and parameters.
Another type of coupling is a rigid sleeve coupling. This type of coupling has a pipe with a bore that is finished to a specified tolerance. The pipe contains two threaded holes for transmitting torque. The sleeve is secured by a gib head key. This type of coupling may be used in applications where a couple of shafts are close together.
Other types of coupling include common and external. Common coupling occurs when two modules share global data and communication protocols. This type of coupling can lead to uncontrollable error propagation and unforeseen side effects when changes are made to the system. External coupling, on the other hand, involves two modules sharing an external device interface or communication protocol. Both types of coupling involve a shared code structure and depend on the external modules or hardware.
Mechanical couplings are essential in power transmission. They connect rotating shafts and can either be rigid or flexible, depending on the accuracy required. These couplings are used in pumps, compressors, motors, and generators to transmit power and torque. In addition to transferring power, couplings can also prevent torque overload.
Applications
Different coupling styles are ideal for different applications, and they have different characteristics that influence the coupling’s reliability during operation. These characteristics include stiffness, misalignment capability, ease of installation and maintenance, inherent balance, and speed capability. Selecting the right coupling style for a particular application is essential to minimize performance problems and maximize utility.
It is important to know the requirements for the coupling you choose before you start shopping. A proper selection process takes into account several design criteria, including torque and rpm, acoustic signals, and environmental factors. Once you’ve identified these parameters, you can select the best coupling for the job.
A gear coupling provides a mechanical connection between two rotating shafts. These couplings use gear mesh to transmit torque and power between two shafts. They’re typically used on large industrial machines, but they can also be used in smaller motion control systems. In smaller systems, a zero-backlash coupling design is ideal.
Another type of coupling is the flange coupling. These are easy to manufacture. Their design is similar to a sleeve coupling. But unlike a sleeve coupling, a flange coupling features a keyway on one side and two threaded holes on the other. These couplings are used in medium-duty industrial applications.
Besides being useful for power transmission, couplings can also prevent machine vibration. If vibration occurs in a machine, it can cause it to deviate from its predetermined position, or damage the motor. Couplings, however, help prevent this by absorbing the vibration and shock and preventing damage to expensive parts.
Couplings are heavily used in the industrial machinery and electrical industries. They provide the necessary rotation mechanism required by machinery and other equipment. Coupling suppliers can help customers find the right coupling for a specific application.
Criteria for selecting a coupling
When selecting a coupling for a specific application, there are a number of different factors to consider. These factors vary greatly, as do operating conditions, so selecting the best coupling for your system can be challenging. Some of these factors include horsepower, torque, and speed. You also need to consider the size of the shafts and the geometry of the equipment. Space restrictions and maintenance and installation requirements should also be taken into account. Other considerations can be specific to your system, such as the need for reversing.
First, determine what size coupling you need. The coupling’s size should be able to handle the torque required by the application. In addition, determine the interface connection, such as straight or tapered keyed shafts. Some couplings also feature integral flange connections.
During the specification process, be sure to specify which materials the coupling will be made of. This is important because the material will dictate most of its performance characteristics. Most couplings are made of stainless steel or aluminum, but you can also find ones made of Delrin, titanium, or other engineering-grade materials.
One of the most important factors to consider when selecting a coupling is its torque capability. If the torque rating is not adequate, the coupling can be damaged or break easily. Torque is a major factor in coupling selection, but it is often underestimated. In order to ensure maximum coupling performance, you should also take into consideration the size of the shafts and hubs.
In some cases, a coupling will need lubrication throughout its lifecycle. It may need to be lubricated every six months or even once a year. But there are couplings available that require no lubrication at all. An RBI flexible coupling by CZPT is one such example. Using a coupling of this kind can immediately cut down your total cost of ownership.
editor by CX 2023-04-23